 |
Angle Plates (37)
Angle Plates with Slots or T-Slots made of special cast iron with high resistance to wear, adjustable angle plates |
 |
Box Angle (27)
Box Angle Quadripartite flat and perpendicular processed, Fronts finely milled, Accuracy 3 fine-conciliation, Parallel Box 4 or 6 -sided exactly, Accuracy 0, 1 or 3, made from Grey cast iron, hollow body with a bar for reinforcement in the center, Flatness DIN 876, Angle accuracy DIN 875 |
 |
Clamping Cube (6)
Clamping Cube, 4 sides with slots, 1 Side (Top) with T-Slots DIN 650, Flatness of the surface to DIN 876/3 |
 |
Dial Gauge (106)
Dial Gauge analog metric or inch, Digital Dial Gauge, Dial Gauges with shock proof and waterproof Dial Gauges. Range up to 100 mm |
 |
Gauge Blocks (12)
Precision Gauge Blocks, made from particularly well selected material of highes Quality. Accuracy DIN 876/00 or DIN 876/0 |
 |
Internal Micrometer (41)
Three - Point Internal Micrometer Measuring Range analog from 6mm to 100mm and digital from 6mm to 300mm |
 |
Marking-off & Surface plates (36)
Marking-off and Surface plates made from special cast iron, stable ribbed design, measuring surface fine milled (Accuracy 2) or fine planed (Accuracy 3). Supporting Feet with height adjustment with screw. Plate size from 2000 mm to 7000 mm |
 |
Master Squares (32)
Master Squares made from extreme hard, wear- restistant and acid- resistant granite or ceramic, Master Squares 90° Accuracy in accordance with DIN 875 and DIN 876, and Master Squares 90° as Square shape and Rectangle in Accuracy in accordance with DIN 874 and DIN 875, accuracy 0 or 00 |
 |
Measuring Pins (92)
Measuring Pins in a Set and single Measuring Pins from 0,01 mm to 20mm. For checking and measuring of bores, boredistances, as setting-gauge for measuring-instruments, for checking of internal- and external-tooth system and many other practicabilities. |
 |
Measuring Plates (105)
Measuring Plates / Control Plates made from Granit ''Impala'' or Ceramic. Flatness to DIN 876, Accuracy 00, 0 and 1. Stand with and without Cabinet and Accessories (Table Adjustment) |
 |
Measuring Table (6)
Precision Measuring Table for Dial Gauges with Measuring surfaces made from hardened steel, granite or ceramic. Different sizes, for calibration purposes. Measuring range up to 200 mm. |
 |
Measuring Tapes (26)
Wood Folding Rules EC-Class III with 10 Links, adhesive, polyamid coated steel measuring tapes up to 6 m length, pockes measuring tapes, also known as roll tape measures in following sizes: 2m, 3m, 5m, 8m and 10 m, standout. Electr. digital roll tape measures 1,5 m |
 |
Measuring Wheel (2)
Electr. Digital Measuring Wheel for outdoor use. With large LCD Display and backlight. Use in construction, road building, green construction and everywhere, where distances are to be measured. |
 |
Pair of Parallels (12)
Precision Pair of Parallels DIN 876/00 or DIN 876/0. Particularly well selected material of highest quality |
 |
Plug Gauges (235)
Limit Plug Gauges in DIN 7162 and 7164 and Limit Thread Plug Gauges in DIN 13. Other Plug Gauges on request. |
 |
Quicktest Gauge (78)
Mechanical and digital Quicktest Gauge for interior and exterior measurement. Measurement of slots, holes or thickness in different sizes and designs. |
 |
Rulers (251)
Straight Edges and Streight Edges with Double-T Form, max. Lenght 6m, Straight Edges with Bevel Edge max Lenght 4m, hardened precision Rulers and Scale Testing max Lenght 2. Also in Programm Knife Straight Edges |
 |
Sine Plates (5)
Precision Sine Plate and Precision Sine Plate 2-Axis, made of alloy tool steel, hardened (58HRC) and ground, precise angles settings with Parallel Gauge |
 |
Spirit Levels (36)
Inspection Spirit Levels for levelling and adjusting of surfaces and cylinders. Inspection Frame Spirit Levels for levelling and adjusting of horizontal and vertical surfaces as cylinders. DIN 877. Housing made from special cast iron. vial from tempered glass with liquid Ethyl ether |
 |
Squares (132)
Precision Inspection Squares, flat or with back Accuracy in accordance with DIN 875/00, DIN 875/0, DIN 875/1 and DIN 875/2, Bevelled Squares, Square with inside bevelled edge, Adjustable Bevelled Edge Squares, Acute Angle Squares 45° and 60°, Center Squares |
 |
Steel-Rules (291)
Flexible and Rigid Rules in 3 different Readings. From 100 mm to 12000 mm and in Reading from left to right or right to left |
 |
Straightedges (14)
Straightedges, special cast iron in Grade 0 and Grade 1 according to DIN 876. 500 mm - 3000 mm length. With lightening holes, sturdy construction, ribbed to protect against bending. |
 |
Straightening Plates (37)
Straightening Plates, solid or ribbed construction, special wear resistant steel casting, Surfaces and four sides fine planed. Stands, suitable for straightening plates, solid angular steel construction. |
 |
Surface Plates (50)
Control- Surface and Testing Plates DIN 876 Accuracy 0, 1, 2 and 3. Stands suitable for Control Plates and Accessories. |
 |
Thickness Gauge (128)
Thickness Gauge for a fast Measurement of Thickness. Different versions for Measurement of Materialthickness (film thickness, thickness of sheet metal, paper thickness, …) |
 |
Vises (15)
Precision Grinding and control vises, adjustable in 2 planes, rotating and swiveling, vises with hardened spindle, with trapezoidal thread, vise, with or without spindle, sine vises, sine control vises. |
